H5000 |
Model | H5000 | |
Input | Rated voltage, Frequency |
1PH/3PH AC 220V 50/60Hz; 3PH AC 380V 50/60 Hz |
Voltage Range | 220V: 170~240V; 380V: 330V~440V | |
Output | Voltage | 220V: 0~220V ; 380 V: 0~380 V |
Frequency | 0.10~400.0 Hz | |
Control method | V/F control, Space vector control | |
Indication | Operating status/Alarm definition, interactive guidance; eg, frequency setting, the output current, DC bus voltage, temperature and so on. | |
Control Specification | Output Frequency Range | 0.10~400.00 Hz. |
Frequency Setting Resolution |
Digital input: 0.01 Hz. Analog input:0,1% of maximum output frequency |
|
Output Frequency Accuracy | 0.01 Hz. | |
V/F Control | Setting V/F curve to satisfy various load requirements | |
Torque Control | Auto increase: auto raise torque by loading condition; Manual increase: enable to set 0.0~20% of raising torque | |
Multifunctional Input Terminal | 8 multi-function input terminals, realizing functions including 15 section speed control, program running, 4 section acceleration/deceleration speed switch, UP/DOWN function and emergency stop and other functions | |
Multifunctional Output Terminal | 3 multi-function output terminals for displaying of running, zero speed, counter, external abnormity, program operation and other information and warnings | |
8 multi-functional special points to switch frequency and power frequency, 1 inverter can control 4 circular variable frequency pumps | ||
Acceleration/deceleration Time Setting | 0~6000 s acceleration/deceleration time can be set individually | |
Other functions | PID Control | Built-in PID control |
RS485 | Standard RS485 communicate function (MODBUS) | |
Frequency Setting | Analog input 0~10V, 0~20mА, can be selected; Digital input: input using the setting dial of the operation panel or RS 485 or UP/DOWN | |
Multi-speed | 8 multi-function input terminals,15 section speed can be set | |
Automatic voltage regulation | Automatic voltage regulation function can be selected | |
Counter | Built-in 2 group of counters | |
Keypad copy parameter | DP-LED05/DP-LED06 keypad (Optional) | |
Protection Function | Overload | 150%, 60s (Constant torque); 120%,60s (variable torque) |
Over Voltage | Over voltage protection can be set | |
Under Voltage | Under voltage protection can be set | |
Other Protections | Overheat, Output short-circuit, over current, and parameter lock and so on. | |
Environment | Ambient Temperature | –10℃~40℃(non-freezing) |
Ambient Humidity | Max. 95% (non-condensing) | |
Altitude | Lower than 1000м. | |
Vibration | Max. 0.5 g | |
Structure | Cooling Mode | Forced air cooling |
Protective Structure | IP20 | |
Install Method | Below 132kW are wall mounted; 160-350kW are wall mounted or cabinet; above 400kW are cabinet |
Model |
Input voltage/ frequency |
Output Power | Capacity | Output current | Overload capacity | Motor Equipped |
(kW) | (KVA) | (A) | (60s)(A) | (kW) | ||
H5400P05D5K |
3PH 380V 50/60Hz |
5.5 | 10 | 12.5 | 15 | 5.5 |
H5400P07D5K | 7.5 | 14 | 17.5 | 21 | 7.5 | |
H5400P0011K | 11 | 19 | 24 | 28.8 | 11 | |
H5400P0015K | 15 | 26 | 33 | 39.6 | 15 | |
H5400P0018K | 18.5 | 32 | 40 | 48 | 18.5 | |
H5400P0022KN | 22 | 37 | 47 | 56.4 | 22 | |
H5400P030KN | 30 | 52 | 65 | 78 | 30 | |
H5400P0037KN | 17 | 64 | 80 | 96 | 17 | |
H5400P0045KN | 45 | 72 | 90 | 108 | 45 | |
H5400P0055KN | 55 | 84 | 110 | 132 | 55 | |
H5400P0075KN | 75 | 115 | 152 | 182.4 | 75 | |
H5400P0090KN1 | 90 | 135 | 176 | 211.2 | 90 | |
H5400P0110KN1 | 110 | 160 | 210 | 252 | 110 | |
H5400P0132KN1 | 132 | 193 | 255 | 306 | 132 | |
H5400P0160KN1 | 160 | 230 | 305 | 366 | 160 | |
H5400P0185KN1 | 185 | 260 | 340 | 408 | 185 | |
H5400P0200KN1 | 200 | 290 | 380 | 456 | 200 | |
H5400P0220KN1 | 220 | 320 | 425 | 510 | 220 | |
H5400P0250KN1 | 250 | 365 | 480 | 576 | 250 |
Sweep WeChat yards pay attention to us
24-hour hotline17775287517
The mobile phone17858950809
Copyright © 2021 All rights reserved Address:NO. 3768, Yexin Road, Maogang, SongJiang District, Shanghai, China