NZ100 Sreies User·s Micro&Economic

Compact size and low cost design; 

·Terminals uncovered, easy for wiring  

·DIN-rail mounting (below 5.5kW)

·Supports MODBUS via RS485

·Maintenance-free

·V/F control; Built-in PID control,

·Power range:  220V 0.4kWw-2.2kW，380V 0.75kW-55kW
 

NZ100

Items		NZ100
Power Supply	Rated voltage, Frequency	One-phase/Three-phase  AC 220V/380V  50/60Hz
	Voltage Range	220V: 170~240V 380V: 330V~440V
Output	Voltage Range	220V: 0~220V  380V: 0~380V
	Frequency Range	0.10~400.00Hz
Control method		V/F control
Indication		Operating status/Alarm definition/interactive guidance:  frequency setting, the output frequency/ current, DC bus voltage and so on.
Control   Speculations	Output Frequency Range	0.10Hz~400.00Hz
	Frequency Setting Resolution	Digital input: 0.10Hz, analog input: 0.1% of maximum output frequency
	Output Frequency Accuracy	0.01Hz
	V/F Control	Setting V/F curve to satisfy various load requirements.
	Torque Boost	Auto increase: auto raise torque by loading Condition; Manual increase: enable to set 0.0~20.0% of raising torque.
	Multifunctional Input Terminal	Four multi-function input terminals, realizing functions including eight section speed control, Program running, four-section acceleration/deceleration speed switch, UP/DOWN function and emergency stop and other functions
	Multifunctional Output Terminal	1 multi-function output terminals for displaying of run, zero speed, external abnormity, program operation and other information and warnings.
	Acceleration/ Deceleration Time Setting	0~999.9s acceleration/deceleration time can be set individually.
Other       functions	PID Control	Built-in PID control
	RS485	Standard RS485 communication function(MODBUS)
	Frequency Setting	Analog input: 0 ~ 10 V, 4~20mA Digital input: Operation panel or RS485 or UP/DOWN. Note: AVI terminals can be used to select an Analog voltage input (AV) and analog current input (AI) through the switch J2.
	Multi-speed	Four multifunction input terminals, 15 section speed can be set
	Automatic Voltage RID ControlliAlation  RrrrRegulation	Automatic voltage regulation function can be selected
	Counter	Built-in 2 group of counters
Protection/Warning       Function	Overload	150%, 60 second(Constant torque)
	Over Voltage	Over voltage protection can be set.
	Under Voltage	Under voltage protection can be set
	Other Protections	Output short circuit, over current, and parameter lock and so on.
Environment	Ambient Temperature	-10℃ to 40℃(non-freezing)
	Ambient Humidity	Max. 95% (non-condensing)
	Altitude	Lower than 1000m
	Vibration	Max.0.5G
Structure	Cooling Mode	Forced air cooling
	Protective Structure	IP 20
Installation		Wall-mounted or standard 35mm rail mounting (≤5.5kW)

 

Specification

Model	Input Voltage (V)	Input Current（A）	Output Power （kW）	Capacity （KVA)	Output Current (A)	Overload capacity (60s)(A)	Motor Equipped（kW)
NZ100-0R4G-2	220V	5.4	0.4	1.0	2.5	3.75	0.4
NZ100-0R75G-2	220V	8.2	0.75	2.0	5	7.5	0.75
NZ100-1R5G-2	220V	14	1.5	2.8	7	10.5	1.5
NZ100-2R2G-2	220V	23	2.2	4.5	11	16.5	2.2
NZ100-0R7G-4	380V	3.4	0.75	2.2	2.7	4.05	0.75
NZ100-1R5G-4	380V	5.0	1.5	3.2	4.0	6	1.5
NZ100-2R2G-4	380V	5.8	2.2	4.0	5.0	7.5	2.2
NZ100-3R7G-4	380V	10.7	3.7	6.8	8.6	12.9	3.7
NZ100-5R5G-4	380V	14.6	5.5	10	12.5	18.75	5.5
NZ100-7R5G-4	380V	20	7.5	11.2	17	25.5	7.5
NZ100-11G-4	380V	26	11	17	25	37.5	11
NZ100-15G-4	380V	35	15	26	32	48	15
NZ100-18G-4	380V	38	18.5	32	37	55.5	18.5
NZ100-22G-4	380V	46	22	37	45	67.5	22
NZ100-30G-4	380V	62	30	52	60	97.5	30
NZ100-37G-4	380V	76	37	64	75	112.5	37
NZ100-45G-4	380V	90	45	72	90	132	45
NZ100-55G-4	380V	105	55	84	110	182.4	55
NZ100-75G-4	380V
NZ100-90G-4	380V
NZ100-110G-4	380V
NZ100-132G-4	380V
NZ100-160G-4	380V

Typical Wiring diagram

Model	W	H	D	A	B	Ød
NZ100-0R4G2-NZ100-1R5G2	68	132	102	120	57	4.5
NZ100-2R2G2	72	142	112.2	130	61	4.5
NZ100-0R7G4-NZ100-2R2G4
NZ100-3R7G4-NZ100-5R5G4	85	180	116	167	72	5.5
NZ100-7R5G4-NZ100-11G4	106	240	153	230	96	4.5
NZ100-15G4-NZ100-22G4	150	330	165.5	316	136	7
NZ100-30G4-NZ100-37G4	217	400	201	385	202	7
NZ100-45G4-NZ100-55G4	300	455	240	440	200	7